200W/m² Loose Wire Electric Underfloor Heating Cable Kit, Dual Teflon™

200W/m² loose wire electric underfloor heating cable is a flexible heating cable kit for rooms with awkward shapes, fixtures or obstacles, where a mat will not fit neatly. The ultra thin 2mm dual-coated Teflon™ (PTFE) cable keeps floor build-up to a minimum under tile and stone.

Each kit is sized by floor area and rated at 200W/m² across the area ordered. The 200W rating gives a faster warm-up, ideal for bathrooms, conservatories and other high heat loss areas.

Key features

• Loose wire for irregular rooms and around fixtures
• Ultra thin 2mm cable
• Dual-coated Teflon™ (PTFE), tougher and more heat resistant than PVC
• 200W/m² output
• For concrete and timber subfloors
• Lifetime warranty*

Specifications

• Output: 200W/m²
• Cable: 2mm, dual-coated Teflon™ (PTFE)
• Sizes: 1m² to 12m² (see options)
• Subfloors: Concrete or timber
• Primary heat source: Yes, with at least 80% floor coverage and suitable insulation
• Warranty: Lifetime*

Installation and compatibility

Lay insulation first where possible, such as XPS insulation boards or Backer Board PRO. This cuts warm-up time and keeps efficiency high, especially over uninsulated concrete. Control the cable with a floor-sensing thermostat from our electric thermostat range.

Work out the size you need with our electric underfloor heating size calculator, and read what is the best cable for electric underfloor heating and our UK underfloor heating cost guide.

Teflon™ is a registered trademark of The Chemours Company FC, LLC and is used here only to describe the cable coating. UFH Direct is not affiliated with Chemours.

*The lifetime warranty covers the original UFH Direct heating product for as long as the first floor covering remains in place, when installed to our instructions. It is void if the product is relocated, the floor is replaced or altered, or the system is modified or damaged after installation. Proof of purchase is required.

Frequently asked questions

Loose wire or heating mat, which should I choose?

Choose loose wire for irregular rooms or around obstacles, where you need control over cable spacing. Mats are quicker to lay in regular shaped rooms.

Can loose wire heating cable be the main heat source?

Yes, provided at least 80% of the floor is covered and suitable insulation is installed.

200W/m² Loose Wire Electric Underfloor Heating Cable Kit, Dual Teflon™ – Fitting Instructions, Declaration of Conformity and Test Report

Download the 200W loose wire heating cable fitting instructions, declaration of conformity and test report as free PDFs. No sign-up and no email address needed. The 200W loose wire heating cable wiring diagram is inside.

• Electric Heat Mats & Loose Wire Cable – Fitting Instructions (PDF) – step by step fitting guide
• Electric Cable Mat – CE Declaration of Conformity (PDF) – UKCA and CE conformity
• Electric Cable Mat – Test Report EN 55014 / EN 60335 (PDF) – EMC and electrical safety test results

Browse all underfloor heating datasheets and technical documents, or call our UK technical team on 0800 999 7978 if you need help choosing.