The 200W/m² electric underfloor heating mat is a pre-spaced heating cable on a 0.5m wide self-adhesive mesh, for laying under tile, stone and stuck-down vinyl or Karndean. The ultra thin 2mm dual-coated Teflon™ (PTFE) cable gives minimal floor build-up and a lifetime warranty*.
The higher 200W/m² output gives a faster warm-up, so it is ideal for bathrooms, kitchens, conservatories and other high heat loss areas.
Key features
- Pre-spaced mesh for quick, even installation
- Ultra thin 2mm dual-coated Teflon™ (PTFE) cable
- 200W/m² output
- Suits tile, stone and stuck-down vinyl or Karndean
- Multiple mats can be joined for larger areas
- Lifetime warranty*
Specifications
- Output: 200W/m²
- Mat width: 0.5m
- Sizes: 0.5m² to 12m² (see options)
- Cable: 2mm dual-coated Teflon™ (PTFE)
- Floor finishes: tile, stone and stuck-down vinyl or Karndean
- Subfloors: Stable timber, concrete or screed
- Warranty: Lifetime*
Installation and compatibility
Lay the mat over a stable subfloor, ideally on insulation such as Backer Board PRO or XPS boards, then embed it in flexible tile adhesive or self-levelling compound before the final floor. For vinyl or Karndean, always embed in self-levelling compound first. Control it with a floor-sensing electric underfloor heating thermostat.
Size your room with the electric underfloor heating mat size calculator. Compare systems in electric vs water underfloor heating, see our UK cost guide and which heating cable is best.
Teflon™ is a registered trademark of The Chemours Company FC, LLC and is used here only to describe the cable coating. UFH Direct is not affiliated with Chemours.
*The lifetime warranty covers the original UFH Direct heating product for as long as the first floor covering remains in place, when installed to our instructions. It is void if the product is relocated, the floor is replaced or altered, or the system is modified or damaged after installation. Proof of purchase is required.
Frequently asked questions
150W or 200W heating mat, which is better?
Both use a similar amount of energy. The 200W mat warms the floor faster and switches off sooner, so it suits high heat loss rooms like conservatories.
Can a 200W mat be the main heat source?
Yes, in domestic or commercial rooms, provided at least 80% of the floor is covered and suitable insulation is installed.
200W/m² Electric Underfloor Heating Mat for Tile and Stone, 0.5m² to 12m² – Fitting Instructions, Declaration of Conformity and Test Report
Download the 200W electric underfloor heating mat fitting instructions, declaration of conformity and test report as free PDFs. No sign-up and no email address needed. The 200W electric underfloor heating mat wiring diagram is inside.
- Electric Heat Mats & Loose Wire Cable – Fitting Instructions (PDF) – step by step fitting guide
- Electric Cable Mat – CE Declaration of Conformity (PDF) – UKCA and CE conformity
- Electric Cable Mat – Test Report EN 55014 / EN 60335 (PDF) – EMC and electrical safety test results
Browse all underfloor heating datasheets and technical documents, or call our UK technical team on 0800 999 7978 if you need help choosing.
Reviews
There are no reviews yet